Fleetliner Saddlebags for 2009-2013 HD Touring Models
Click or Tap to Activate Item
Designed as a direct replacement for the HD hard saddlebags with an added bit of Corbin design flair. We bring the bag wall right in to the side of the fender and mold around the shocks to give a more integrated and flowing look. The slick, rounded lines of the saddlebags and nearly seamless doors provide a truly custom touch that installs as easily as the stock bags using the existing hardware. Each bag provides 22 liters of storage adding functionality to the exquisite form.
Fleetliner saddlebags fit close to the fender to hide the hardware and mounting points. With Corbin bags, you won't need the side filler plates we offer for the Corbin fender or the fender extension with integrated sides ala the Street Glide. Carrying content weight closer to the centerline of the bike will provide better load bearing, improved balance, less width and an overall cleaner look.
On top of the bags, we've integrated filler panels that keep things looking smooth. Simply remove the filler panels and the Corbin Fleetliner bags are ready to work with your HD accessory docking kit. This will allow your bagger to run with detachable luggage racks, passenger backrests or Tour Paks. Clearance is provided to use these items in the front (solo) or rear (two-up) positions. Naturally the doors of the Corbin Fleetliner bags will clear your trunk in either position.
Corbin saddlebags are tooled up especially for each bike model so they're visually integrated. The flowing shape provides a bit of a Hot Rod flair and a look far cleaner than "one shape fits all" hard luggage. Both bags feature top loading so contents can't spill out when opened. The close fit design keeps a narrower profile for less width to worry about when lane splitting. Notice also how the Corbin bags are made to provide plenty of ground clearance in the corners... these bags are made for folks that RIDE!
Our design team shaped these bags to work with your stock exhaust system, but they will work equally well with any system that has a profile the same or lower than your stock pipe. We've actually tested them with systems from Bub, S&S, Samson and Rinehart. Since we use the stock saddlebag hangers, it's safe to say that any pipes that would work with stock bags will also work with Corbin Fleetliners.
Fleetliner saddlebags fit perfect and install simply onto your stock bag hangers and reuse the 1/4 turn fasteners. In the front, our bags are shaped to allow room for passengers' legs on the rear footpegs. Includes heel pads for a clean look that protects the bag's finish with locking latch mechanism built in. Please note, these bags will not work with the saddlebag crash guards!
Both bags come completely lined to protect your cargo and feature locking doors for security. Manufactured of a durable, roto-molded polyurethane material, Fleetliner bags are available in primer or prepainted a single color and ready for immediate installation. Corbin saddlebags work with your stock seat or a variety of Corbin seat models (Hollywood Solo model #HD-FLH-9-H shown).
For a really clean look on top, we engineered remote door releases into the heel pads. These chrome releases have a built in lock so you can secure the saddlebag contents when you step away from your bike. Inside, a spring loaded popper opens the door slightly when released. Saddlebag doors are hung on a Corbin designed billet hinge with hydraulic helper that lifts the door up and away from the saddlebag. Very trick!
Capacity: So what exactly does 22 Liters mean anyway? Just to give you an idea, we took some measurements and compared these bags to those made by Harley-Davidson for the FLH models (Electra-Glide, Street Glide, Road King and Road Glide). This is how it shakes out...
Corbin Fleetliner Bags Capacity: 22 liters each
Stock HD Hard Bags Capacity: 26 liters each
That's right, although the Corbin Fleetliner bags appear much smaller than the H-D models they are actually fairly close in capacity!
Manufactured with our special formula polyurethane and roto-molded to give very tight tolerances with minimal shrinkage so each part comes out true to the original design.
When ordering parts in "primer gel-coat" you can expect a part ready for your painter's preparation. Most Corbin components are also available prepainted and ready for immediate installation.
Corbin Fleetliner Bags come fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the doors keeps out the elements. Locking doors keep contents secure.
Capacity: 22 liters each
Installation is simple using the stock bag hanger rails and 1/4 turn fasteners that hold your stock bags. Perfectly suitable for home installation.
Fleetliner Bags work with your stock exhaust system or a variety of aftermarket pipes. If you are using an aftermarket set of pipes, please assure they mount no higher than the original system did.
Corbin's Fleetliner saddlebags do not work with saddlebag crash guards!
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
2360 Technology Parkway Hollister, CA 95023 800-538-7035
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Fleetliner Bags, 2009-2013 HD Touring bikes, Painted One Color
Fleetliner Bags, 2009-2013 HD Touring bikes, Primer
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.