Classic styling with a nostalgic touch and generously sculpted seating... that's Corbin's Classic Solo saddle! Designed specially to fit the 2009 Electra-Glide, Road Glide and Street Glide models.
The all new, lower chassis of Harley's new Baggers gave us additional design latitude for developing a perfected shape and good ground reach. Wide, sculpted seating position creates a larger area of contact for excellent weight distribution. Shaped like your body to eliminate pressure points and give long lasting support that will keep you in the saddle all day. Also available in a Close version that provides seating two inches closer to the bars with a narrower nose to ease ground reach.
Corbin's rigid fibertech basepan provides a perfect fit and is built low to hug the frame. This allowed us to create a foam shape that keeps you in the sweet spot which provides a better center of gravity and more positive feeling of control. Deep, supportive bucket design gives over four inches of vertical support (14" with backrest installed). All of this adds up to a very relaxed posture and comfortable ride so you'll be able to go out and put serious miles under the tires.
Inside, our exclusive Comfort Cell foam provides firm support that stays resilient indefinitely. We cast this special Closed Cell material nearly twice as firm as the stock foam to support your body weight for day long comfort. That's why we always say "firm is a good thing!"
Designed to work with an optional Corbin backrest for added comfort and support. Angle adjustable to fit a wide variety of statures and riding postures. Internal hardware keeps a clean look on your bike. Works with a variety of Corbin backrest models. We recommend model #02-SB (shown) for a very good blend of form and function.
Classic and Close Solo saddles work with either of two passenger pillion seat models to suit your taste and riding needs. Touring pillion is shaped for a large contact patch and maximum passenger comfort. 50's style pillion provides a slimmer profile for clean looks with medium range passenger support. Both models will work with your Electra-Glide's Tour-Pak or with the HD detachable sissy bar system. Both are constructed of the same high quality materials as the Classic Solo and are covered to match for an integrated look.
When using a sissy bar or Tour Pak, we offer coordinated backrest pads to match your Corbin system. On the Tour Pak above we show our trunk armrest that provides maximum passenger support. Sculpted design gives a large contact patch and excellent support with integrated armrests. For the detachable sissy bar, we offer a contoured touring quality backrest pad that bolts up just like the stock pad. Covered to match your Corbin saddle system.
All components include genuine leather seating inserts for a truly luxurious ride. For a very classy and subtle touch we recommend our standard natural grain leather seating with coordinating vinyl sides. We prefer leather seating because it is durable, will breathe with your body and adapt with the foam shape as it breaks in. Vinyl side panels help to support the foam shape and keep the cover looking nice longer. A wide variety of color and texture options are available by special order at no additional charge.
Classic Solo saddle offers the option of an electric seat heater for an added bit of luxury. Wiring easily into your stock HD fusebox, the Corbin seat heater is controlled via a conveniently located switch along the left side. Two heat settings are available and are maintained automatically by integrated controller. You just wire in the Corbin supplied pigtail and enjoy the warmth on those chilly morning rides.
Corbin's solo and passenger pillions use our key lock system for easy on and off. Once the included brackets are mounted the saddles will install and remove with a simple twist of a key. Corbin brackets mount to stock locations on your bagger and are very simple to install. If you opt for electric heat, we include a wiring pigtail that integrates with the oem fuse box. Complete directions included.
Here's something new... Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the #02-SB Ovalbac or #297-SB backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black. See Accessories tab for additional information and ordering.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Measurements
Rider seating: 15.5" wide x 16" long CLOSE Solo: 15.5" wide x 14" long Touring Pillion: 11.5" wide x 11.5" long 50's Pillion: 8.5" wide x 11.5" long
Measurements:
Rider seating: 15.5" wide x 16" long CLOSE Solo: 15.5" wide x 14" long Touring Pillion: 11.5" wide x 11.5" long 50's Pillion: 8.5" wide x 11.5" long
Designed to mount using Corbin's integrated key lock system. Once brackets are installed, saddles will mount & remove with a simple key in the side. Classic solo and BOTH pillion seats feature key lock mounting.
Corbin's TOURING pillion will not fit with the Stealth Detachable Luggage Racks #53472-09 and #53566-09.
We have found that most riders prefer a lower, more relaxed riding posture on their baggers. As such many riders have rotated the stock handlebars back two inches. This setup works very well with our Classic Solo saddle.
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Saddles and backrests include genuine leather seating inserts in our standard Natural Grain black leather. Color and texture options are available by special order at no additional charge, just click on the "Glossary" or "Materials" buttons for more information.
ITEM
DESCRIPTION
PRICE
#HD-FLH-9-S
Classic Solo saddle, no heat, 2009-2010 H-D Touring models
$479
#HD-FLH-9-S-E
Classic Solo saddle w/ HEAT 2009-2010 H-D Touring models
$599
#HD-FLH-9-S-C
CLOSE Solo saddle, no heat, 2009-2010 H-D Touring models
$479
#HD-FLH-9-S-C-E
CLOSE Solo saddle w/ HEAT 2009-2010 H-D Touring models
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available. 
All Corbin saddles (with very little exception) include 
