Corbin offers two versions of our Classic solo seat and two different pillion pad options for your passenger. The uniquely styled Classic Solo looks excellent while providing an extraordinary amount of rider comfort. Corbin's seating platform conforms to the shape of your body with separated seating and back platforms that provide support and more square inches of body contact. This is one of the secrets of long range comfort and is a staple of Corbin design.
Got reach issues on your Bagger? We also make a "Close" version of the Classic solo that provides seating almost two inches closer to the bars for an easier reach. We made the nose a little narrower to allow for easier ground reach too. To figure out which design is best for you, just follow these simple steps: Sit on the motorcycle in your regular riding posture and have a friend measure from the threaded hole in your fender to the area where you are seated. Now compare this measurement: 14 inches use our Classic Solo, 15.75 inches use our Close Solo.
To add to the nostalgic appeal of your bagger, we offer an optional chrome V-rail that bolts directly to the saddle. Corbin's V-Rail easily bolts up directly to the Corbin saddle and comes to you in show quality chrome for a perfect look. Please note that our V-Rail will not work in conjunction with passenger saddles.
For added back support both Classic solo and Close solo accept an optional rider's backrest that provides an additional nine inches of vertical support. Our backrest installs easily into hardware concealed inside the saddle for a very clean look. In order to fit a wide range of riders, it is fully angle adjustable. Just install the backrest into the saddle, lock it in place with a single set screw and adjust the backrest angle to suit.
Corbin's Ovalbac series backrests come covered to match your saddle, but also offer the option of custom finishing plates on the rear. Backrests come standard with an ABS leather look backing plate but you can choose from a variety of models.
For maximum versatility we've designed the Corbin solo saddles to work with two different style passenger pillion seats. For a very sly, low-profile look the Hollywood pillion is the choice. This model is great for occasional passengers that ride with you on short to medium length trips.
If your passenger wants touring class comfort, than our Touring Pillion is the choice for you. This model offers a wider seating area for more square inches of body contact. Just like the seat, our pillions are built with our exclusive high-density Comfort Cell foam to provide firm support that lasts. Comes decorated to coordinate with your Corbin solo saddle.
For an added bit of luxury, both the Classic Solo saddle and Close Solo have the option of electric heated seating. You'll be amazed how a heated seat can raise your core body temperature during one of those chilly rides. This system easily wires directly to your Harley's fusebox and provides two levels of heat with the flip of a switch. Heater unit and automated controller are built into the saddle and come pre-installed. The two position switch is conveniently located on the left side of the seat.
Designed to work with a variety of Harley-Davidson accessory items like detachable sissy bars and Tour Paks. It's not possible to test all possible accessories, but we have confirmed the following most popular items:
Tall Detachable Sissy Bar #529337A (with HD or Corbin pad)
Short Detachable Sissy Bar #52935-04 (with HD or Corbin pad)
Two up Tour Pak Rack #53303-07
Solo Tour Pak Rack #53260-02
Tour Pak models: #53147-98B, #53018-04A, #53092-05 & #53690-06
Corbin Streamliner trunk on H-D Tour-Pak rack #53303-07 or #53260-02
Speaking of the Streamliner trunk... This makes a nice, clean addition to your bike while keeping a smooth flowing look. Designed to hold an adult size full face helmet with room to spare. Very convenient for all your traveling needs. Includes sculpted passenger backrest pad in coordinating leather. Get complete information on the Trunk (HERE).
Saddles and pillions include genuine leather seating. This new pattern with black faux-ostrich stripe, braided welts and tuck & roll stitch keeps a subtle look but provides a nice custom touch too. If you prefer to keep things simple, we can make your saddle with smooth black stripe and plain welts. With our new separated seating platform, we recommend always using this stitch pattern.
Pillion seats do not work with the Harley-Davidson tourpak with audio components mounted under the Tour Pak rack as found on the Ultra models. See this image for a view of the component.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Measurements
Rider Seating Standard: 13" wide x 16.5" long
Rider Seating CLOSE:13" wide x 15" long
Back Support w/ #02-S: 11"
Approx seat height: 26.5"
50's Pillion: 7.5" wide x 10" long
Touring Pillion: 12" wide x 11" long
Measurements:
Rider Seating Standard: 13" wide x 16.5" long
Rider Seating CLOSE:13" wide x 15" long
Back Support w/ #02-S: 11"
Approx seat height: 26.5"
50's Pillion: 7.5" wide x 10" long
Touring Pillion: 12" wide x 11" long
Installs easily using brackets supplied with the saddle. Corbin's mounting system allows for use of our unique key lock system. Once the brackets are installed, the saddle will install and remove with a twist of the key.
V-rail must be removed to install a passenger pillion pad. All other components can be used together.
Pillion seats do not work with the Harley-Davidson tourpak with audio components mounted under the Tour Pak rack as found on the Ultra models. See this image for a view of the component.
Designed to work with a variety of Harley-Davidson accessory items like detachable sissy bars and Tour Paks. It's not possible to test all possible accessories, but we have confirmed the following most popular items:
Tall Detachable Sissy Bar #529337A (with HD or Corbin pad)
Short Detachable Sissy Bar #52935-04 (with HD or Corbin pad)
Two up Tour Pak Rack #53303-07
Solo Tour Pak Rack #53260-02
Tour Pak models: #53147-98B, #53018-04A, #53092-05 & #53690-06
Corbin Streamliner trunk on H-D Tour-Pak rack #53303-07 or #53260-02
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Corbin's Chrome V-Rail bolts up easily to your Classic Solo saddle with no additional brackets so installation is very clean. Triple-plate chromed for a show quality finish, the V-Rail provides a nice nostalgic look for your bike and simple installation. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
As shown in the images above: this new pattern with black faux-ostrich stripe, braided welts and tuck & roll stich keeps a subtle look but provides a nice custom touch too. If you prefer to keep things simple, we can make your saddle with smooth black stripe and plain welts. With our new separated seating platform, we recommend always using this stitch pattern.
ITEM
Stripe Style
DESCRIPTION
PRICE
#HD-FLHX-8-S-E
Classic Solo, Heated, 2008
$539
#HD-FLHX-8-S
Classic Solo, no heat, 2008
$429
#HD-FLHX-8-CS-E
Close Classic Solo, Heated, 2008
$539
#HD-FLHX-8-CS
Close Classic Solo, no heat, 2008
$429
#HD-FLHX-6-50S
Hollywood Pillion
$159
#HD-FLHX-6-TP
Touring Pillion
$199
#02-SB
Ovalbac Leather Backrest (ea)
$229
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
To add to the nostalgic appeal of your bagger, we offer an optional chrome V-rail that bolts directly to the saddle. Corbin's V-Rail easily bolts up directly to the Corbin saddle and comes to you in show quality chrome for a perfect look. Please note that our V-Rail will not work in conjunction with passenger saddles. 
For an added bit of luxury, both the Classic Solo saddle and Close Solo have the option of electric heated seating. You'll be amazed how a heated seat can raise your core body temperature during one of those chilly rides. This system easily wires directly to your Harley's fusebox and provides two levels of heat with the flip of a switch. Heater unit and automated controller are built into the saddle and come pre-installed. The two position switch is conveniently located on the left side of the seat. 
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available. 
All Corbin saddles (with very little exception) include 
