Gambler Saddle for 2004 Harley Davidson CVO Electra-Glide
Gambler saddle offers a sleek, flowing appearance and low profile design that has made this design extremely popular for 'round town cruising. Gambler features a comfortable driver’s position with a clean pillion seating area providing a flawless profile. Built-up of Comfort Cell® foam that allows a low saddle that retains comfort value. Sculpted seating disperses rider's weight ergonomically and gives you lasting support while still providing good ground reach at stop signs! This is an excellent seat option for your Electra-Glide if you often ride two-up short to medium distances.
Our Gambler saddle is designed to work with accessories available from Harley-Davidson like the Tourpak shown here. We offer a slim model backrest pad that works on the standard Tourpak or the low profile "Pizza Box" style model. We also offer a full touring model trunkpad with arms that works great on the big Tourpak. Both trunkpads are ergonomically sculpted to provide maximum body contact area and support. Our backrest pads come decorated to coordinate with your Corbin saddle in your choice of leather colors and textures. The trunk Armrest installs into the stock bolt locations while the slim model requires 4 holes drilled into the tourpack.
Corbin's Gambler saddle will work along with a variety of luggage rack and passenger backrest options for your Electra-Glidewith the passenger pads available from Harley or with a coordinated pad of our own making. This option gives your passenger added support and a feeling of security without going to a full trunk setup. Corbin's luggage rack pad is sculpted to fit the shape of your passenger's back to give better support without hot spots. Of course, we make the pad to coordinate with your Corbin saddle for a totally integrated look.
Corbin's Gambler saddle is available for standard FLH and FLT models as well, but this one is designed specifically for the CVO Screaming Eagle model Electra-Glide. Harley-Davidson refers to this model as the FLHTCSE. The largest difference between our standard Gambler seat model and this one is that the nose area of the saddle has been redesigned to match up perfectly to fit to the chrome tank panel that comes on the Screaming Eagle model. For other FLH/FLT models, please click HERE.
The Gambler saddle uses a new key lock mounting system available exclusively from Corbin. We include the entire setup along with the saddle so it's ready for immediate installation on your bike.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Measurements
Rider Seating: 13" wide x 17" long
Passenger: 7" wide x 9.5" long
Measurements:
Rider Seating: 13" wide x 17" long
Passenger: 7" wide x 9.5" long
Latch Pin Installation Instructions: [ Page 1] We use a new keylock mount system for a very clean look and simple installation. Simply install the provided latch pin into the stock screw location in your fender. Then insert the tongue at the front of the saddle into the chassis as normal and lower the rear of the saddle onto the latch pin. Push down on the rear of the saddle to latch and assure saddle is secured. To remove, simply insert and turn the key to release the lock and lift off your seat.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
With the Corbin EZ-Fill adding oil to your primary is simple. Remove the knurled plug from the inspection cover and pour. It looks great and works just as well (a hallmark of Corbin design). Available for: FX, FL Shovelheads, FLST Softails, FXDWG Dyna Wide-Glide, FXR Models, Roadking, Road-Glide and FLH / FLT models. *More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Sorry, this product has been discontinued. This web page remains intact for informational purposes only.
ITEM
DESCRIPTION
PRICE
#HDFLH-GAM4-CVO
Sorry, this saddle was discontinued.
Seating Panels
Side Panels
Welts
Tail Section
Stitching
Special Notes
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
