Corbin Smuggler for Ducati ST-2, ST-3, ST-4 & ST-4s
You've never seen anything like this before for your Duc! Our Smuggler design offers a very comfortable seat up front combined with a locking trunk for convenient access to under seat storage. Corbin's Smuggler is designed to emulate the shape of the tank and carry the lines of the tail section through the back end. We even coordinate the paint to your stock Ducati paint job! Inside there's plenty of room for your essential traveling gear.
Corbin's Smuggler is constructed of durable Fibertech for years of quality service and durability. We include everything all bolted together so it's ready for installation right out of the box. Just transfer the latch pin from your stock seat and you'll be ready to roll. Smuggler door is fully weather stripped and features a locking latch to secure your goodies. Side walls of the Smuggler tail are lined for a smooth finish and we even have a storage pouch on the door for small items like cash or keys.
Up front the saddle is designed to provide ergonomically correct support. Our sculpted seating creates a wider area of body contact to equalize pressure and eliminate hot spots. Neutralized to curb sliding in the saddle, this design also helps to minimize rider fatigue.
Luxuriously upholstered with genuine leather in your choice of styles and colors. Coordinating vinyl side panels finish the look and support the foam shape to keep the saddle looking sharp. For an extra, custom touch we offer a new Italian flag emblem Corbin tag that can be used on your saddle.
Corbin now uses this special "Italian Flag" logo tag on all of the saddles we make for Italian motorcycles.
If you prefer the standard Corbin tag, please specify when ordering.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
Tail and Saddle
Corbin's Smuggler tail and saddle are assembled in a single piece so the entire assembly mounts like stock for simple installation. You will need to transfer the locking bracket from your stock unit onto the Corbin setup... this is very easy!
Ducati Lock
Corbin's basepan does not include the recessed area built in for the Ducati
lock. A flatter basepan gave us more flexibility to design a properly shaped seating position and better ergonomically designed support.
Measurements
Rider Seating: 13.5" W x 14.5" L
Approx. seat height: 32.5"
Trunk Capacity: Aprox. 6 Liters
Measurements:
Rider Seating: 13.5" W x 14.5" L
Approx. seat height: 32.5"
Trunk Capacity: Aprox. 6 Liters
Corbin's Smuggler tail and saddle are assembled in a single piece so the entire assembly mounts like stock for simple installation. You will need to transfer the locking bracket from your stock unit onto the Corbin setup... this is very easy!
Please be forewarned that the paint on your Smuggler may not be a perfect match for the color on your motorcycle. Over the years we've determined there are differences in color from bike to bike especially once the paint has started to fade (reds and silvers are notorious for this and change shade quickly). Due to this, we have established paint colors that are close for the widest range of Ducati's we could test with. If you are concerned about a perfect match, order your Smuggler in primer and have a local shop match the paint.
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Please indicate bike color in Special Notes field below.
ITEM
DESCRIPTION
PRICE
#ST2-SMUG
Smuggler Saddle, Painted
$799
Seating Panels
Side Panels
Welts
Italian Flag Emblem
Special Notes
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
All Corbin saddles (with very little exception) include 
